Instructions:

1.) Enable dev_blind with multiman
2.) Copy the selected "custom_render_plugin.rco" and past it in dev_blind/vsh/resource/
3.) Feel the tension as 2 seconds of nostalgia course through you mind!

Notes:

1.) I didn't use rco files from 2.80 instead i made my own with firmware 4.XX in mind.
2.) Should work on all 4.XX firmwares.
3.) The pack contains 3 different folders each with a different game boot.

особенности:

Install new boot logo
Install new boot sound
Change ps3 game boot
Remove Cinavia Protection
Install Danial-Softwares theme
Change PS3 wave lines
Change PS3 xmb sounds
Remove Health warning

как установить:

Just put Danial-XMB Mod v1.4 in to your falsh memory root and connect it to your ps3 then goto install package file and install it.
after you install, open it then select Danial XMB Mod v1.4 and then select your CFW.

как восстановить обратно:

Open Danial-Xmb Mod v1.4 scroll down select backup and then restore.

Скачать Danial-XMB Mod v1.4 [Danial EDITION] – MIRROR

Well now with a simple package installation you can kiss the singstar logo goodbye!

Things needed:
Multiman over 4.XX.
Any ps3 with custom firmware 4.XX. (Theoretically it should work on rebug but i didn't try it)
A potato with more than 256 MB ram.

Tutorial:
Copy, FTP or download the file named "PS3~dev_hdd0~tmp~explore~xil2~game.zip"
Use multiman and double click on the zip and it will auto install and remove Singstar possibly forever

Video showing the removal:



Notes:
If this doesn't work delete the folder dev_hdd0/tmp/explore/xil2/game/gb and reapply through multiman.
The file can be downloaded directly into the ps3 via the official web browser and it can be saved to the ext hdd and applied via multiman.
You can bring singstar back by deleting dev_hdd0/tmp/explore/xil2/game/gb folder.
I don't know what all the fuss was about it took me around an hour to figure it out.
I didn't try it on rebug but it should work.
Please tell me if it doesn't work because i think different ps3s have different number folder.

Скачать утилиту - https://www.mediafire.com/?c6xvdvv95c1ctkx

Ok guys, so here's something I have for you. This is an idps/psid changer.

This changes the idps in section 0 or section 6 and the psid in section B (not A sorry, i corrected that on the wiki) PERMANENTLY on flash. so, you know the drill. be VERY careful when using this tool and always take precautions with a flasher.

You're going to need 5 things: root_key, a backup of your nor flash (only nor is supported at the moment but you can easily make it compatible for nand consoles by changing the offsets at merge_section as well as change the name to whatever you wish to call your flash), a back up of eid (you can obtain this with flow rebuilder or using memdump) and, obviously, the idps and the psid you want to use on your console.

As for the final hash in each section, the libeeid creator was kind enough to take care of that, so don't worry about that but PLEASE use valid idps and psid files!!!

Any questions, please ask. and yes, that handles cex2dex too.

hex 0 1 2 3 4 5 6 7 8 9 A B
dec 1 2 3 4 5 6 7 8 9 10 11 12 <- 12 sections
Anyways, i figured this might be easier to use than c2d, because you can take a look at the source yourself and see and do your own changes, in case there's anything wrong.

WARNING. IF YOU USE THIS AND SOMETHING BAD HAPPENS. IT'S YOUR RESPONSIBILITY.

Finally, in related news zecoxao has also made available a PPU Binary Backup Manager but it needs testing.

To quote: I have a binary of a backup manager precompiled a long time ago. I'm not sure if it's even possible to boot it but I'm convinced this binary is meant either for 3.41 or 3.55, but i need someone to test it.

Features:
1. Increase Fan Speed without using any tools like fan control utilities and others.
2. Unlike using fan control utilities, with System manager, no stutter or lags in games.
3. Fan Control and USB wake up works when ps3 starts. No need to launch any homebrew apps before.
4. Modified LED Indicator

The LEDs indicate the following:
Yellow Led Fixed: temperature below 70 degrees
Led yellow / green flashing temperature above or equal to 70 degrees
Led red / yellow / green flashing temperature above or equal to 75 degrees
Green LED remained two seconds every 10: led activity
Leds off for two seconds: indicate a write access to USB device. This is important to know, because we should not unplug a USB device in a deed, obviously (we wait for the LED to turn off and unplug a few seconds later)

Spoof 4.50 for CFW PS3ITA 4:41 DEX:

1) Download the spoof here: https://mega.co.nz/#!JsQTD....hIH4rEg
2) Extract the zip file you just downloaded to
the folder ps3ita
3) Copy the folder ps3ita on the root of a USB
stick
4) Insert the USB stick into the port on the
right of the ps3 (the one closest to the bluray
player)
5) Start ps3ita loader (found here: https://www.ps3ita.it/download/homebrew/Ps3ita_loader.rar )

Spoof 4.50 for CFW 4.21 PS3ITA DEX:

1) Download the spoof here: https://mega.co.nz/#!BhQEg....6cLedzo
2) Extract the zip file you just downloaded to
the folder ps3ita
3) Copy the folder ps3ita on the root of a USB
stick
4) Insert the USB stick into the port on the
right of the ps3 (the one closest to the bluray
player)
5) Start ps3ita loader (found here: https://www.ps3ita.it/download/homebrew/Ps3ita_loader.rar )

Features:
run tasks in the background
tasks are running all the time (vsh, ingame, etc.)

Features of Sample Plugin:
remote peek/poke at any time
full ram access via lv1 peek/poke

Requirements:
4.46 Firmware Cex or Dex with LV2 Syscall 10 (e.g. Rebug)
4.50 Firmware with LV2 Syscall 10 (untested, dunno if it exists at all)

how to:
if you're on rebug, run the toolbox and enable the "LV2 Memory Protection" patch
run the VSH Plugin Sample App
connect to your PS3 from PC using a telnet client (e.g. putty) on port 4546
enjoy

Q&A
Q: What kind of other background tasks could be done?
A: ftp server, debug plugins, cheat plugins, fan utilities, etc.

Q: Do i have to run the sample app again after reboot?
A: Yes, the changes being made are non-permanent.

Q: How many plugins at once does the payload support?
A: one.

Q: May I use the source code in my project?
A: As long as its an open source project, yes.

special thanks go to:
cobra for opensourcing and flatz for 4.50 symbols and helping me fix a bug