Changelog v2 fix

Fixed compatiblity with some GTA regions.

The software will create a directory named book and inside you will put your books or manual in the following ways
book->VirtualTennis->image1.png, image2.png, toto.png, titi.png etc.... limited to 100 images per book or manual
The images must be FullScreen 960x544

First you need to install Ensō and use VitaShell to mount your USB drive as ux0. This will copy the required files to your USB drive. Unmount ux0 after the files are copied.

Next, you should move ux0:tai/config.txt on your original memory card to ur0:tai/config.txt if you made changes or just delete ux0:tai/config.txt if you have not made changes. If you have a PSTV or LCD model, you must also delete config.txt from your internal memory. You can mount imc0 from VitaShell and delete imc0:tai/config.txt if it exists.

Finally, modify ur0:tai/config.txt and add ur0:tai/usbmc.skprx under the line that says *KERNEL. You should always use this file to install plugins from now on. Also copy usbmc.skprx to ur0:tai.

Usage:

If this your first time using adrenaline, then read the author readme to install it correctly,
otherwise it will not work, because this is depends on adrenaline, and make sure to install
adrenaline folder in the storage root ( ux0:adrenaline or ur0:adrenaline ) after installing it,
run it once.

1)

To enable adrenaline bubble booter, copy 'adrbblbooter' folder to your PSVita storage root :
You can use ux0: or ur0: storage:

ux0:/adrbblbooter

2)

Add 'adrbblbooter.suprx' first in line before 'adrenaline.suprx' under *TITLEID in HENkaku config :
Will use NPXX00001 as an example of the PSP bubble in livearea:

*NPXX00001
ux0:adrbblbooter/adrbblbooter.suprx
ux0:adrenaline/adrenaline.suprx

If you want to disable adrenaline startdat image,
add 'adrbblbooter_nostartdat.suprx' instead of 'adrbblbooter.suprx'
first in line before 'adrenaline.suprx' in HENkaku config :

*NPXX00001
ux0:adrbblbooter/adrbblbooter_nostartdat.suprx
ux0:adrenaline/adrenaline.suprx

After that Reload taiHen config.txt from molecularShell.

3)

Go to 'ux0:adrbblbooter/bubblesdb' folder, and create a text file and
name it with any TITLEID you want to make it boot (ISO\CSO\PBP\PSOne) from bubble :

ux0:adrbblbooter/bubblesdb/NPXX00001.txt

Open the created file 'NPXX00001.txt' in notepad and add the full path to
the ISO\CSO\PBP\PSOne game into it ( must be a ms0: path, not ux0:pspemu
also you can change\update the path any-time) :

ms0:/PSP/GAME/FILER/EBOOT.PBP

Note: This line means in PSVita side as ( ux0:pspemu/PSP/GAME/FILER/EBOOT.PBP )

That's it, do these steps ( #2, #3 ) for each PSP bubble you want to auto\direct boot it.

If you want to remove bubble auto\direct boot for specific game,
just delete the text file which containing it's titleid name:

ux0:adrbblbooter/bubblesdb/NPXX00001.txt

Enjoy :)