2013-06-25: 3k3y working with ALL MODELS, INCLUDING SUPERSLIM!

The long wait is over - there is now no need for CFW for key extraction. We will release
firmwae updates for both PATA and SATA versions in the coming week.

27/11/13 - 3k3y firmware update
2.07

Note : If you ever want to generate
the latest gyo.db in real time, just
click this link here - https://
www.3k3y.com/ird_files/gyo and
update your 3k3y with the file it
generates.

Download

Direct link - https://
xkeydownloads.com/3k3y/02.07.zip
---------------------------
New Features
----------------------------
Improved handling of PS3 Extra
menu ISO
Support for PS3 4004
Improved handling of PS3 Extra
menu ISO (logical partition)
Removed requirement for PS3
boot disk when loading PS3 Extra
menu
Dont eject disk when console
sends stop/start cmd
(308R/310R)
-----------------------------------
3k3y firmware UPDATE v2.07
------------------------------------
-------------
Instructions:
-------------
1. Extract the files "rootfs",
"uImage" ,, "3key.cfg" and
"gyo.db" (the fpga updates are not
included in this update. If you
already did the latest fpga updates
from 2.02 or bought your 3k3y
recently you don't need to update
again. If your FPGA is not up to
date please download 2.02 and
use the fpga from there. Why is it
left out? People are not reading
and doing the wrong updates so
this will filter some of them out!)
2. Open 3key.cfg with Notepad and
configure it if needed. If you do
not wish to change the settings on
your 3k3y then you do not need
to edit OR update your 3k3y with
this file, leave it out!
2-1. Add the files to the root
folder of a Flash Drive or HDD.
(Make sure to "eject" the drive
properly from the PC, it may
otherwise cause corrupt files)
3. Connect the Flash drive or HDD
to your 3k3y remote and wait for
the 3k3y to start the update.
3-1. The remote OLED will now
display "UPDATING - PLEASE
WAIT" for about 35 seconds. (Do
not turn off your PS3 or
disconnect the remote while
updating. FPGA updates will take
a little longer)
4. Once the update is completed,
the OLED will display "UPDATE
COMPLETE - RESET" Reboot your
PS3 and the 3k3y should now be
updated to the latest firmware.
5. That's it! Continue to enjoy
using 3k3y with the new features!
NOTE! If you use the same drive
as you store content on to do the
update with, then its
recommended (not needed) to
remove the "rootfs", "uImage" &
"3key.cfg" and any other files
from the root of your drive after a
firmware update. Since keeping
them there will cause the 3k3y to
check the files if they are a newer
firmware version then stored on
your 3k3y micro SD card, and
because of that take longer time
for your HDD to be recognized.

Full Changelog

[20/02/13] v01.02 Added support for BLD/BLF ISO fil
[03/03/13] v01.03B2 Fix for older PS3s
[04/03/13] v01.04 Enhanced stealth
[14/03/13] v01.05 XML root node fix
[04/05/13] v01.07 3KS support
[04/08/13] v02.00 Fix for error 8001050F
Add Web Interface
Add eject physical disk when emulation is idle
Add diags via on board LED (1-Passthru, 2-Emu,
Add Alt D1 to 3k3y.cfg / About Info
Add option to use PC generated ISO MENU in 3k3
Add option to boot decrypted ISOs
Support for Super Slim
Add Advanced LED diagnostics
Fix remote with bad FPGA version
[26/08/13] v02.01 Merge 3Dump and NoKeys
Support for for PSX img/bin/cue files
Improved support for for PSX img/bin/cue files
Support for homebrew/no IRD game ISOs
Override drive type in 3Key.cfg (3Dump only)
Improve bad BD handling
Improved ISO load to XMB time (400X)
Remove Autoeject & D1 options from 3key.cfg
Add support for gyo.db & auto detection of dis
[03/09/13] v02.02 Fix for ISOMenu
Improved handling of bad ISOs
Improved handling of ejecting media when no dr
[21/09/13] v02.03 Improved updater code
Fix 304R drives in NoKeys mode
[5/11/13] v02.05B1 New Game Selection Menu system
Unbork Dynamic ISOMENU
New Mr Waffles code
[8/11/13] v02.06 Improved handling of PS3 Extra men
Support for PS3 4004
[12/11/13] v02.07B1 Improved handling of PS3 Extra men
Removed requirement for PS3 boot disk when loa
[13/11/13] v02.07B2 Dont eject disk when console sends

OFW 4.55 swap disc support with game updates working
No wire/soldering required for cover switch handling
SWAPTRICK=Y setting added to 3key.cfg
SWAPTIMEOUT=xx (between 5 - 25 seconds) setting added to 3key.cfg
Optional LANGUAGE=P0T setting added to 3key.cfg, giving P0T-NOoDLE font on the remote display in English (Thanks Sir Garbagetruck aka Lastebil for the heads up)

This list might change before public beta and final release.

UglyClicker is working on the swap disc support in 3k3y IsoTools, so that should be ready in time for public release.

Unfortunately my attempts to solve the "game update" and "quit game" freeze problems for 3Dump.bin users (who have drive key) failed, so I doubt any fix for that will make it into this release.

v2.10 Public Beta

Cobra 4.55 ISO tools supprt, COBRAISO=Y setting added to 3key.cfg