Installation

1. Put "oclockvita.suprx" in 'tai' folder in the root of your Vita.
2. Change config.txt in that directory to load plugin for title of your choice by adding new lines like below:


After that just run the game and press SELECT + UP to enable menu. Press SELECT + DOWN to close menu.​

First release, LEDs are not working yet (so they will continue to blink even when the DS3 is connected lol).
Also, you have to pair your DS3 to the Vita manually (you can use this tool: https://dancingpixelstudios.com/sixaxis-controller/sixaxispairtool/ or sixpair: https://help.ubuntu.com/communi....pair.c)
You can find the Vita's MAC address in: Settings -> System -> System information

Для тех, кому интересно, вот список файлов, которые в настоящее время этот плагин чистит:

vd0:/history/data.bin

vd0:/history/data.bak

ur0:user/00/shell/playlog/playlod.dat

ur0:user/00/shell/playlog/playlog.dat

Инструкция:

Скопируйте плагин по адресу ux0: /tai/history_wipe.skprx

Обновите конфигурацию taiHen (us0:/tai/config.txt) и добавьте путь примерно так:

*KERNEL
ux0:tai/history_wipe.skprx

Перезагрузите PS Vita

c0ck bl0cker by qwikrazor87

Here is a simple plugin to prevent those pesky little kids from messing with your Vita.
This plugin starts with a specified game/app and doesn't start the game/app until
a new password is created or the password entered matches.
I had CMA in mind when making this plugin, to prevent kids from messing with the Vita's precious files.
But this plugin also works with other games/apps.
I tested it on the Settings app but it doesn't not show up on screen, but it does run in the background.
I still haven't figured out how to fix it, so I'll leave it for now.
Also, it doesn't work on all games, certain ones will prevent the password file from being opened, not sure why.

Thanks to everyone involved in the community.
I hope you enjoy this more than I did making it.

Instructions:
copy c0ck_bl0cker.suprx here:
ux0:tai/c0ck_bl0cker.suprx

update ux0:tai/config.txt, for example (repeat for each game/app):
*NPXS10026 #CMA ID
ux0:tai/c0ck_bl0cker.suprx

*NPXS10015 #Settings ID
ux0:tai/c0ck_bl0cker.suprx

Start molecularShell, press Start and update taihen config.txt in menu.
now launch game/app and get c0ck bl0cked. :P

VitaMote is a piece of software that works on Android devices that allows you to use your Vita as a controller. You need the following stuff to use it:

An Android device that’s on Android 4.1+ (Duh)

A PSVita on 3.60 (and taiHEN) with Rinnegatamante’s VitaPad

Some common sense is recommended

This homebrew seems to work by mapping PSVita buttons to keyboard keys. The SELECT and START keys are mapped as BACK and CENTER on Android respectively. The software is still in Alpha stage and the developer has said that he plans to add analogue stick support in a future release according to his post on Reddit.

Where can I get it and how does it work?

You must follow these instructions to install it:

Install VitaPad on your Vita

Install VitaMote on your Android devices (you must have unstrusted sources enabled to install the APK)

Open the VitaMote app and input in your Vita’s IP as per VitaPad

Go to the Settings app on your Android device and enable the VitaMote IME

Change the keyboard to VitaMote IME on your Android, make sure your Vita is connected to Wifi. Just close VitaPad and toggle the keyboard again if it doesn’t work the first time around.

It’s important to note that you need to be on the same WiFi network for this to work. I have personally tested this on a 2012 Nexus 7 on Android 7.1.1 and it works without any issues. Playing Sonic on a Genesis emulator works perfectly! Keep in mind that this is an alpha release and make sure you report any bugs you encounter! Please don’t bug the developer tho!

Beta (Fix)

Only fixes the problem when pressing the back touch panel of the vita, now the two analogs are working.

*Minimal Android 4.1 (armeabi, armeabi-v7a, arm64-v8a).

Beta Is Here!

-Analog Support Left(W,A,S,D) Right(I,J,K,L).
-Improvements in Key reception and Key Combos.
-Change IME button on the App to Easy Configuration.

Note: X, C, T, S are now A, B, Y, X for a better Android Support.

This version only works with Vitapad 1.0 (Future versions will be for 1.1)

*Minimal Android 4.1 (armeabi, armeabi-v7a, arm64-v8a).