You can watch the video or follow a text instruction below.
To restore your PSP, follow a simple instruction:
- Get neccessary hardware to make a probe:
- a USB to TTL converter;
- a 1n4148 diode;
- a 10kOhm resistor (not required);
- a way to connect to battery contacts (anything from loose wires to connector from a sacrificial battery)
- soldering equipment or breadboard with jumpers
- Build your probe - one-wire UART (aka K-line) adapter. You can omit an external battery if you power your PSP with a DC charger. Be aware that adapter's power output alone is not sufficient to power the PSP. You can also omit 10kOhm diode.
- Create a Magic Memory Stick compatible with PSP-3000. You need to use either an official JigKick MS clone or balika011's DDCv9 - you can create both with my tool (https://github.com/khubik2/JigKick-Media-Creator)
- To start the emulator, install neccessary pip packages:
pycryptodome,tk,pyserialandrequests. - Insert your memory stick and connect your adapter to computer running the emulator, select the COM port of your adapter and start the service.
- Connect your probe to PSP's battery terminals. If done right, it should take one or two seconds for PSP to enter recovery mode and boot from MS.
| Model (last digit does not matter) | DATE CODE | Is compatible? |
|---|---|---|
| PSP-1000 | Any | Supported, any magic MS |
| PSP-2000 | Any besides 8C | Supported, any magic MS |
| PSP-2000 | 8C | Supported, only JigKick clone or DDCv9 |
| PSP-3000 | 8C 8D 9A 9B and some 9C | Supported, only JigKick clone or DDCv9 |
| PSP-3000 | some 9C; 9D, any code starting with 0 or 1 | Supported, only JigKick clone (07g Soon to be Supported) |
| PSPgo (N1000) | Any | Soon to be Supported |
| PSP Steet (E1000) | Any | Soon to be Supported |
- M4j0r - Syscon Voltage Fault Injection glitch help
- Wildcard - Syscon glitching and dumping
- Sean Shablack aka Kyp40 aka FBIsoBOT - Syscon glitching and dumping, simplest one wire UART adapter schematic ever
- Proxima - Firmware reverse engineering, battery authentication response generator script
- khubik - Emulator code, GUI design, authentication script porting
- dogecore - Authentication script porting, GUI code, C# emulator threading fix
- Mathieu Hervais - decrypt-sp & decrypt-OS2 homebrew code
- SSL/Zerotolerance - re-encryption for Math's homebrews
- zecoxao - decrypt-sp & decrypt-os2 PC ports, boards supply, authentication script porting help
- Yoti - decrypt-sp improvements, MSID Dumper, contribution to PSPx.ru's 3000 series JigKick hacking thread, PSP 3000 supplier (<3), PSP 3000 unbrick PoC
- ErikPshat - Useful intel about JigKick, PSPx.ru's 3000 series JigKick hacking thread contribution, creation of functional JigKick memcard clone from original dump, userguides for MSID dumping and JigKick memory card creation
- Boryan, lport3, dx3d and many others from PSPx.ru's 3000 JigKick hacking thread - battery communication dumps and protocol reversal, one wire UART adapter schematics and more!
- lolivera - PSP 3000 unbrick PoC, TA-095 testing
- 预见 (zakezzzz) - TA-092 testing
- dee008 - Portable PSP battery controller emulator, PSP Street K-line pin location
- Wr0zen - PSPgo boards donation
- VrOdin - PSPgo tracing