mGBA
====

mGBA is an emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack. It also supports Game Boy and Game Boy Color games.

Up-to-date news and downloads can be found at [mgba.io](https://mgba.io/).

[![Build status](https://travis-ci.org/mgba-emu/mgba.svg?branch=master)](https://travis-ci.org/mgba-emu/mgba)

Features
--------

- Highly accurate Game Boy Advance hardware support[<sup>[1]</sup>](#missing).
- Game Boy/Game Boy Color hardware support.
- Fast emulation. Known to run at full speed even on low end hardware, such as netbooks.
- Qt and SDL ports for a heavy-weight and a light-weight frontend.
- Local (same computer) link cable support.
- Save type detection, even for flash memory size[<sup>[2]</sup>](#flashdetect).
- Support for cartridges with motion sensors and rumble (only usable with game controllers).
- Real-time clock support, even without configuration.
- Solar sensor support for Boktai games.
- Game Boy Camera and Game Boy Printer support.
- A built-in BIOS implementation, and ability to load external BIOS files.
- Turbo/fast-forward support by holding Tab.
- Rewind by holding Backquote.
- Frameskip, configurable up to 10.
- Screenshot support.
- Cheat code support.
- 9 savestate slots. Savestates are also viewable as screenshots.
- Video and GIF recording.
- Remappable controls for both keyboards and gamepads.
- Loading from ZIP and 7z files.
- IPS, UPS and BPS patch support.
- Game debugging via a command-line interface and GDB remote support, compatible with IDA Pro.
- Configurable emulation rewinding.
- Support for loading and exporting GameShark and Action Replay snapshots.
- Cores available for RetroArch/Libretro and OpenEmu.
- Many, many smaller things.

#### Game Boy mappers

The following mappers are fully supported:

- MBC1
- MBC1M
- MBC2
- MBC3
- MBC3+RTC
- MBC5
- MBC5+Rumble
- MBC7
- Wisdom Tree (unlicensed)

The following mappers are partially supported:

- MBC6
- MMM01
- Pocket Cam
- TAMA5
- HuC-1
- HuC-3

### Planned features

- Networked multiplayer link cable support.
- Dolphin/JOY bus link cable support.
- M4A audio mixing, for higher quality sound than hardware.
- Re-recording support for tool-assist runs.
- Lua support for scripting.
- A comprehensive debug suite.
- e-Reader support.
- Wireless adapter support.

Supported Platforms
-------------------

- Windows Vista or newer
- OS X 10.8 (Mountain Lion)[<sup>[3]</sup>](#osxver) or newer
- Linux
- FreeBSD
- Nintendo 3DS
- Nintendo Switch
- Wii
- PlayStation Vita

Other Unix-like platforms, such as OpenBSD, are known to work as well, but are untested and not fully supported.

### System requirements

Requirements are minimal. Any computer that can run Windows Vista or newer should be able to handle emulation. Support for OpenGL 1.1 or newer is also required, with OpenGL 3.2 or newer for shaders and advanced features.

Downloads
---------

Downloads can be found on the official website, in the [Downloads][downloads] section. The source code can be found on [GitHub][source].

Controls
--------

Controls are configurable in the settings menu. Many game controllers should be automatically mapped by default. The default keyboard controls are as follows:

- **A**: X
- **B**: Z
- **L**: A
- **R**: S
- **Start**: Enter
- **Select**: Backspace

Compiling
---------

Compiling requires using CMake 3.1 or newer. GCC and Clang are both known to work to compile mGBA, but Visual Studio 2013 and older are known not to work. Support for Visual Studio 2015 and newer is coming soon.

#### Docker building

The recommended way to build for most platforms is to use Docker. Several Docker images are provided that contain the requisite toolchain and dependencies for building mGBA across several platforms.

To use a Docker image to build mGBA, simply run the following command while in the root of an mGBA checkout:

	docker run --rm -t -v $PWD:/home/mgba/src mgba/windows:w32

This will produce a `build-win32` directory with the build products. Replace `mgba/windows:w32` with another Docker image for other platforms, which will produce a corresponding other directory. The following Docker images available on Docker Hub:

- mgba/3ds
- mgba/switch
- mgba/ubuntu:xenial
- mgba/ubuntu:bionic
- mgba/ubuntu:cosmic
- mgba/ubuntu:disco
- mgba/ubuntu:eoan
- mgba/ubuntu:focal
- mgba/vita
- mgba/wii
- mgba/windows:w32
- mgba/windows:w64

#### *nix building

To use CMake to build on a Unix-based system, the recommended commands are as follows:

	mkdir build
	cd build
	cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ..
	make
	sudo make install

This will build and install mGBA into `/usr/bin` and `/usr/lib`. Dependencies that are installed will be automatically detected, and features that are disabled if the dependencies are not found will be shown after running the `cmake` command after warnings about being unable to find them.

If you are on macOS, the steps are a little different. Assuming you are using the homebrew package manager, the recommended commands to obtain the dependencies and build are:

	brew install cmake ffmpeg libzip qt5 sdl2 libedit pkg-config
	mkdir build
	cd build
	cmake -DCMAKE_PREFIX_PATH=`brew --prefix qt5` ..
	make

Note that you should not do a `make install` on macOS, as it will not work properly.

#### Windows developer building

To build on Windows for development, using MSYS2 is recommended. Follow the installation steps found on their [website](https://msys2.github.io). Make sure you're running the 32-bit version ("MSYS2 MinGW 32-bit") (or the 64-bit version "MSYS2 MinGW 64-bit" if you want to build for x86_64) and run this additional command (including the braces) to install the needed dependencies (please note that this involves downloading over 1100MiB of packages, so it will take a long time):

For x86 (32 bit) builds:

	pacman -Sy --needed base-devel git mingw-w64-i686-{cmake,ffmpeg,gcc,gdb,libelf,libepoxy,libzip,pkg-config,qt5,SDL2,ntldd-git}

For x86_64 (64 bit) builds:

	pacman -Sy --needed base-devel git mingw-w64-x86_64-{cmake,ffmpeg,gcc,gdb,libelf,libepoxy,libzip,pkg-config,qt5,SDL2,ntldd-git}

Check out the source code by running this command:

	git clone https://github.com/mgba-emu/mgba.git

Then finally build it by running these commands:

	cd mgba
	mkdir build
	cd build
	cmake .. -G "MSYS Makefiles"
	make

Please note that this build of mGBA for Windows is not suitable for distribution, due to the scattering of DLLs it needs to run, but is perfect for development. However, if distributing such a build is desired (e.g. for testing on machines that don't have the MSYS2 environment installed), running `cpack -G ZIP` will prepare a zip file with all of the necessary DLLs.

#### Toolchain building

If you have devkitARM (for 3DS), devkitPPC (for Wii), devkitA64 (for Switch), or vitasdk (for PS Vita), you can use the following commands for building:

	mkdir build
	cd build
	cmake -DCMAKE_TOOLCHAIN_FILE=../src/platform/3ds/CMakeToolchain.txt ..
	make

Replace the `-DCMAKE_TOOLCHAIN_FILE` parameter for the following platforms:

- 3DS: `../src/platform/3ds/CMakeToolchain.txt`
- Switch: `../src/platform/switch/CMakeToolchain.txt`
- Vita: `../src/platform/psp2/CMakeToolchain.vitasdk`
- Wii: `../src/platform/wii/CMakeToolchain.txt`

### Dependencies

mGBA has no hard dependencies, however, the following optional dependencies are required for specific features. The features will be disabled if the dependencies can't be found.

- Qt 5: for the GUI frontend. Qt Multimedia or SDL are required for audio.
- SDL: for a more basic frontend and gamepad support in the Qt frontend. SDL 2 is recommended, but 1.2 is supported.
- zlib and libpng: for screenshot support and savestate-in-PNG support.
- libedit: for command-line debugger support.
- ffmpeg or libav: for video and GIF recording.
- libzip or zlib: for loading ROMs stored in zip files.
- SQLite3: for game databases.
- libelf: for ELF loading.

SQLite3, libpng, and zlib are included with the emulator, so they do not need to be externally compiled first.

Footnotes
---------

<a name="missing">[1]</a> Currently missing features are

- OBJ window for modes 3, 4 and 5 ([Bug #5](http://mgba.io/b/5))

<a name="flashdetect">[2]</a> Flash memory size detection does not work in some cases. These can be configured at runtime, but filing a bug is recommended if such a case is encountered.

<a name="osxver">[3]</a> 10.8 is only needed for the Qt port. It may be possible to build or running the Qt port on 10.7 or older, but this is not officially supported. The SDL port is known to work on 10.5, and may work on older.

[downloads]: http://mgba.io/downloads.html
[source]: https://github.com/mgba-emu/mgba/

Copyright
---------

mGBA is Copyright © 2013 – 2020 Jeffrey Pfau. It is distributed under the [Mozilla Public License version 2.0](https://www.mozilla.org/MPL/2.0/). A copy of the license is available in the distributed LICENSE file.

mGBA contains the following third-party libraries:

- [inih](https://github.com/benhoyt/inih), which is copyright © 2009 Ben Hoyt and used under a BSD 3-clause license.
- [blip-buf](https://code.google.com/archive/p/blip-buf), which is copyright © 2003 – 2009 Shay Green and used under a Lesser GNU Public License.
- [LZMA SDK](http://www.7-zip.org/sdk.html), which is public domain.
- [MurmurHash3](https://github.com/aappleby/smhasher) implementation by Austin Appleby, which is public domain.
- [getopt for MSVC](https://github.com/skandhurkat/Getopt-for-Visual-Studio/), which is public domain.
- [SQLite3](https://www.sqlite.org), which is public domain.

If you are a game publisher and wish to license mGBA for commercial usage, please email [licensing@mgba.io](mailto:licensing@mgba.io) for more information.
